our skills

• Recommendations on the installation of equipment
• Definition of safety distances
• Modeling of hazardous phenomena (PHAST software)
• Sizing / Location flares and vents (PHAST and FLARESIM)

• Lists of ATEX source equipment
• Sizing of ATEX zones
• ATEX zoning drawings / Explosion protection document
• Lists of ATEX classified equipment
• Verification of the conformity of equipment located in the ATEX zone

• Audit of existing systems
• Active and passive fire protection philosophy and strategy
• Location study of fire protection equipment
• List of structures and equipment supports to be fireproofed
• Fire network and firefighting equipment Layouts
• Design, verification and optimization of fire systems (hydraulic calculations)
• Firewater and foam concentrate calculations
• D9 and D9A Note (CNPP guide)
• Sizing of the fire pump and fire water and foam concentrate storage tanks
• Fire PFD (Process Flow Diagram) et P&ID (Piping and Instrumentation Diagram)
• Datasheets and technical specifications (specifications)
• Emergency Response Plan

• HAZID (HAZard IDentification)
• HAZOP (HAZard and OPerability)
• QRA (Quantitative Risk Analysis)
• Dropped objects
• Ship collisions 
• FERA (Fire and Explosion Risk Analysis)
• FRA (Fire Risk Assessment)
• SIMOPS (SIMultaneous OPerationS)
• HIRA (Hazard Identification Risk Assessment)
• SAFEOP (SAFE OPerability studies)
• HFE (Human Factors Engineering)
• EERA (Escape Evacuation and Rescue Analysis)
• FMECA (Failure Modes, Effects and Criticality Analysis
• LOPA (Layer Of Protection Analysis)
• SIL (Safety Integrity Level)
• RAM (Reliability, Availability and Maintanability)

• Safety studies
• Environmental Autorization document
• Accidental event modeling (PHAST Software)
• Atmospheric dispersion modeling (Aria Impact software)
• Emergency response plan
• Regulatory requirements identification
• Regulatory compliance audit
• Recommendation of corrective measures

• Audit of existing systems
• Fire and gas detection philosophy and strategy
• Location study of fire and gas detectors
• Fire and gas detection layouts
• Fire and Gas Detection Cause and effect matrices
• Datasheets and technical specifications (specifications)

• Smoke extraction engineering
• Fire modeling and simulation
• Calculations via FDS, CFD and CFAST

Complete your team with Safengy engineers

Outsourcing your studies with a lump sum

We intervene according to the way which better matches, lump sum and/or in technical assistance, full or partial time.